Does an EV Charging Station Need PSE Certification?: Japan's 2026 EVSE Import Path for Electrical Safety and Radio Compliance

In short

An EV charging station (EVSE) needs PSE certification under Japan's Electrical Appliance and Material Safety Act (電気用品安全法) only when METI's designated product lists actually cover that unit's...

Does an EV Charging Station Need PSE Certification?: Japan's 2026 EVSE Import Path for Electrical Safety and Radio Compliance

An EV charging station (EVSE) needs PSE certification under Japan's Electrical Appliance and Material Safety Act (電気用品安全法) only when METI's designated product lists actually cover that unit's voltage, current, and power class; the classification turns on the specific model, not on the product category "EV charger." A networked charger with Wi-Fi, Bluetooth, or cellular for OCPP remote management also triggers a separate Radio Act (電波法) certification, regardless of the PSE outcome.

Does Japan require PSE certification for EV chargers?#

There is no blanket rule that says "EV chargers require PSE" or "EV chargers are exempt." The Ministry of Economy, Trade and Industry (METI) maintains the designated product lists under the Electrical Appliance and Material Safety Act (電気用品安全法), and an item is only subject to PSE if it appears on one of those lists as an enumerated 電気用品 (electrical appliance). The product's commercial name carries no legal weight here; a supplier's own marketing copy calling something an "EV charger" does not determine its regulatory status.

What does matter is the unit's technical profile: rated voltage, rated current, power output, and whether it is AC Level 1/2 equipment (which supplies alternating current through control electronics while the vehicle's onboard charger does the AC-to-DC conversion) or a DC fast charger (which houses its own power conversion electronics and delivers direct current to the vehicle). Equipment that performs AC-to-DC conversion sits in the same functional family as devices METI's designated lists have historically reached, such as AC adapters classed as 直流電源装置 (DC power supply devices). Whether a specific DC fast-charging unit's power conversion stage lands inside an existing designated category, or outside all of them, cannot be assumed from that family resemblance. It needs a per-model check against the current lists before anyone quotes a certification path.

Is EV charging equipment on METI's PSE designated product list?#

There is no single confirmed answer that covers every EVSE model, because METI's designated lists are closed and enumerate specific appliance types rather than broad categories. A manufacturer has to run the same Applicability Assessment any importer runs for a new electrical product: match the unit's voltage, current, power rating, and circuit topology (AC-only vs AC-to-DC conversion) against the Specified (特定電気用品) and Non-Specified (非特定電気用品) lists, and document the result in writing.

This is the same discipline Aplash applies across unrelated product categories, from household appliances to PSE, PSC, and food safety overview cases where an internal assumption about classification turned out wrong on verification. A charger that is purely a low-voltage DC signal pass-through, with no connection to a 一般用電気工作物 (general-use electrical installation), can fall outside DENAN entirely; a mains-connected AC-to-DC conversion unit almost never does. Assuming either outcome without running the assessment is the most common way an EVSE import timeline slips.

Diamond PSE vs Circle PSE: which applies to EVSE?#

Whether an EV charger falls under Diamond PSE (特定電気用品, third-party certification) or Circle PSE (非特定電気用品, self-declaration) depends entirely on where the specific model lands on METI's designated lists, and that has to be confirmed per model rather than assumed from the product category. Treat any claim that "EV chargers are Diamond" or "EV chargers are Circle" as unverified until an Applicability Assessment has actually run against the current lists for that unit's voltage, current, and power class.

The two paths differ substantially in process. Diamond PSE requires third-party testing through a METI-designated Registered Conformity Assessment Body (RCAB), a factory inspection, and carries a fixed validity period before renewal. Circle PSE allows self-declaration backed by accredited lab testing, with no factory inspection and no fixed expiration as long as the design and applicable standard stay unchanged. A CB Test Certificate from an IEC 60335-series or related test program can sometimes shortcut the Circle lab-testing step, but a report written for the EU or US market will usually need delta testing against Japan-specific requirements before it is accepted as sufficient. Neither path should be quoted until the classification step is complete.

Can a foreign manufacturer without a Japan entity become a Notifying Supplier?#

Yes, through the Notifying Supplier (届出事業者) mechanism, which lets a party without a Japan establishment register with METI and hold the compliance obligation. Under the Electrical Appliance and Material Safety Act (電気用品安全法), anyone carrying on the business of manufacturing or importing a designated 電気用品 must notify METI within a set period of starting that business. A foreign EVSE manufacturer selling into Japan needs either its own Notifying Supplier registration or an existing registered party, such as Aplash, whose name then appears on the product's PSE labelling and who carries the ongoing recordkeeping and audit obligations that come with it.

This structure is distinct from customs representation. A customs-procedure agent appointed under the Customs Act (関税法) handles import declarations and duty payment; it does not create or substitute for a Notifying Supplier registration. The two frameworks run in parallel and neither one discharges the other's obligations, the same separation covered in more detail in PSE certification and the Notifying Supplier model. Where a client already runs goods through customs representation for other product lines, the EVSE's PSE obligation still needs its own registration track; it does not ride along with an existing customs appointment.

Does a networked or smart EV charger need Radio Act certification too?#

Yes. Any EVSE with Wi-Fi, Bluetooth, or cellular connectivity for remote monitoring, billing, or OCPP (Open Charge Point Protocol) management triggers a separate certification requirement under the Radio Act (電波法), administered through type certification commonly called 技適 (Technical Conformity Certification) and coordinated through bodies such as TELEC (Telecom Engineering Center). This sits entirely apart from the PSE determination; a charger can clear electrical safety classification and still be unable to legally transmit in Japan until its radio module passes 技適.

The two regimes are checked by different parties for different reasons: METI and the product's labelling address electrical safety, while the Ministry of Internal Affairs and Communications (総務省, MIC) and TELEC address spectrum and transmission conformity. A charger's cellular modem or Wi-Fi radio may already carry a certification from its country of manufacture, but that certification does not transfer automatically; Japan requires its own conformity assessment for the specific radio module as integrated into the final product. This dual-track pattern is not unique to EV chargers. The same logic governs any connected consumer device, as covered in PSE and Giteki dual certification for wireless devices, and it applies independently of whether the charger's battery-adjacent components raise separate questions, the kind addressed in the e-bike battery PSE exemption for a different connected product category.

What is the correct sequence for importing and certifying an EV charger?#

Classify the specific model first, confirm or establish the Notifying Supplier route, complete testing against the applicable technical standard, and only then address the Radio Act requirement if the unit transmits. Running these out of order is the most common cause of a stalled EVSE launch.

A workable sequence runs as follows.

(a) Classify the exact model against METI's current designated product lists, covering voltage, current, power rating, and AC-only versus AC-to-DC conversion topology, and document the Diamond, Circle, or not-applicable result in writing before quoting any certification cost. (b) Confirm Notifying Supplier status, either the manufacturer's own registration or an existing registered party, since this is what allows the PSE mark to be affixed and the product sold. (c) Complete testing to the applicable standard, through an RCAB for Diamond PSE or an accredited lab (with a CB report shortcut where one applies) for Circle PSE. (d) Where the unit has Wi-Fi, Bluetooth, or cellular for remote management, run the Radio Act assessment and 技適 certification separately, since this has its own testing and filing track through TELEC and does not follow from a PSE result either way.

Frequently Asked Questions#

Does a home-use Level 1 or Level 2 EV charger need the same certification as a DC fast charger?

Not necessarily the same path, because the two differ in technical function: a Level 1/2 unit typically supplies AC while the vehicle's onboard charger converts it, whereas a DC fast charger performs its own AC-to-DC conversion on the unit itself. That functional difference is exactly why each model needs its own Applicability Assessment against METI's designated lists rather than a single assumed classification for "EV chargers" as a category.

If our EV charger has no Wi-Fi or Bluetooth, do we still need to worry about the Radio Act?

No, a unit with no wireless transmission capability at all has nothing for the Radio Act (電波法) to apply to, since that regime is triggered by RF transmission, not by electrical function. The PSE classification still applies independently and needs its own confirmation regardless of connectivity.

How long does PSE certification typically take for a new EV charger model?

Timelines depend on which path the Applicability Assessment confirms. A Circle PSE path with an existing CB report generally runs faster than a full lab-testing path, and a Diamond PSE path, which adds third-party RCAB review and factory inspection, runs longer than either. Confirm the applicable path before committing to a launch date, since quoting a timeline before classification is complete is a common source of schedule slippage.


This article is informational only and does not constitute legal, tax, or regulatory advice. Consult a qualified advisor before acting on the content. Last Updated: November 2026.