Importing Used or Refurbished Wireless Devices Into Japan: Does Giteki Certification Carry Over?

In short

A used or refurbished wireless device keeps its original Technical Conformity Certification (技術基準適合証明), known as Giteki (技適), as long as the certified configuration and the physical Giteki mark...

Importing Used or Refurbished Wireless Devices Into Japan: Does Giteki Certification Carry Over?

A used or refurbished wireless device keeps its original Technical Conformity Certification (技術基準適合証明), known as Giteki (技適), as long as the certified configuration and the physical Giteki mark both survive the resale process intact. Swap the radio module, alter the certified RF characteristics, or lose a readable mark during refurbishment, and the device needs a fresh compliance review before it can go back on sale in Japan.

Does Giteki Certification Stay Valid When a Device Changes Hands?#

Yes, in principle. The Radio Act (電波法) certifies a device configuration, not a particular owner or sale event, so a factory-certified phone, router, or IoT device that is resold used or refurbished keeps its original Giteki status as long as nothing about the certified configuration changed.

The certification attaches to the specific hardware and RF design that TELEC (the Testing and Certification for Radio and Telecommunications Equipment body operating under Ministry of Internal Affairs and Communications (MIC, 総務省) authority) evaluated against the technical standards in the first place. A reseller importing a batch of used units that are mechanically and electrically identical to what left the factory, with the Giteki mark still legible, is not re-triggering the certification process. The risk sits entirely in what changes between original sale and resale, not in the resale itself.

What Happens If the Giteki Mark Is Damaged, Illegible, or Missing After Refurbishment?#

A missing, illegible, or physically altered Giteki mark breaks the traceable link between the device in hand and the certification record, which is treated the same as having no certification at all for compliance purposes. Refurbishment processes that affect the housing, battery compartment, or label area are where this most often happens.

Giteki marking requirements call for the mark to be shown on the device in a durable, visible form, typically molded, etched, or affixed to the housing or displayed through the device's own on-screen menu where the device supports a software-displayed mark. Case replacement, battery swaps that disturb an adjacent label, screen or back-glass refurbishment, or aggressive cleaning and resurfacing during a grading process can remove or obscure it. Once the mark cannot be read or matched to a certification record, the practical position is the same as an uncertified device: the importer cannot demonstrate compliance at the border or at point of sale, and a compliance review is the only way back to a defensible position.

Does Changing Carrier Bands, Region Lock, or Firmware Affect Giteki Coverage?#

A firmware-only change that leaves the certified RF characteristics untouched usually does not disturb Giteki coverage; a change that alters frequency, output power, modulation, or spurious emissions does. How Giteki handles hardware changes works through this same line for a manufacturer's own hardware revisions, and the logic carries over directly to a reseller's refurbishment work.

Unlocking a device from one carrier to another, or flashing region-specific firmware, is not automatically a problem if the underlying radio hardware and its certified operating parameters are untouched. What does matter is whether the unlock or flash activates bands, power levels, or modulation schemes outside what TELEC evaluated for that unit. A phone originally certified for a narrower band plan than the Japan market uses, then firmware-unlocked to transmit on bands outside that certified scope, has moved outside its own certification regardless of how clean the physical mark still looks.

Does Swapping a Radio Module or Making a Hardware Modification Require Fresh Certification?#

Yes. Any hardware change that alters the certified radio module, antenna design, or RF front end ends the device's claim to its original Giteki certification, because the certification was issued against that specific hardware configuration. A refurbisher who replaces a damaged Wi-Fi or cellular module with a different part number, even a functionally similar one, has created a device TELEC never tested.

This is the same trigger point covered for manufacturer hardware revisions in the Giteki hardware revision guide: a component substitution that shifts RF output changes what needs certifying, not whether certification is needed. For a reseller, the practical sources are component-level repairs on damaged units, parts harvested from a different model during a repair-and-resell operation, and third-party replacement modules sourced to cut repair cost. Any of these puts the unit in the same category as an uncertified new import for Radio Act purposes.

Do Bulk or Mixed Lots of Used Devices Need a Certification Check Before Import?#

Yes, bulk lots need a per-model (not per-unit) compliance check, because Giteki status tracks the model and configuration, not the shipment. A lot of five hundred visually similar phones can contain several hardware revisions, several regional variants, and units with and without intact marking, and each of those groups carries a separate compliance answer.

Grey-market resale and refurbishment operations commonly buy mixed lots from multiple source markets to fill volume, which is exactly where certification exposure concentrates. The practical screening sequence is to sort the lot by model and hardware revision first, confirm the Giteki mark is present and legible on a representative sample of each group, and treat any group failing either check as needing a fresh determination before it enters inventory for the Japan market. Running this check before committing warehouse space and listing the units is cheaper than discovering the gap after a sale.

Does PSE Certification Also Need Checking on Resold Wireless Devices?#

Yes, for any battery-powered or mains-powered wireless device, because Radio Act Giteki coverage and Electrical Appliance and Material Safety Act (電気用品安全法) PSE certification are two separate regimes under two different ministries and neither substitutes for the other. PSE and Giteki dual certification covers the dual-certification requirement for wireless devices in full, and the same logic applies to resale: a used phone or router that keeps its Giteki coverage intact can still have a PSE question open if the battery, charger, or power adapter bundled with the resale differs from what was originally certified.

A refurbisher who replaces an original battery with an aftermarket cell, or bundles a different charger in the resale package, has potentially created a new PSE question even where the Giteki side is clean. The two checks run independently and both need to clear before a reseller can treat a used unit as compliant for sale in Japan.

A reseller moving from occasional resale into a structured import operation for used or refurbished wireless stock benefits from building this screening into intake rather than per-shipment, and that kind of ongoing customs and compliance structuring for Japan market entry sits with an authorized customs clearance process (通関委任状, ACP) provider rather than with the refurbisher's own staff making the call unit by unit.

Sorting a lot of used or refurbished stock into a defensible resale position comes down to a short set of checks, not a long audit.

(a) Confirm the Giteki mark is present, legible, and matches a certifiable model and hardware revision, not just that the device powers on. (b) Confirm no radio module, antenna, or RF-relevant component has been swapped for a different part since original certification. (c) Confirm any firmware change, carrier unlock, or region flash does not activate bands, power levels, or modulation outside the original certified scope. (d) Confirm the battery, charger, or power adapter bundled at resale matches or still falls within the original PSE certification, since Giteki and PSE clear independently. (e) For bulk lots, run the check per model and hardware revision group, not per unit, and quarantine any group that fails before it reaches inventory.

Frequently Asked Questions#

Can I resell a used smartphone in Japan if it still has a visible Giteki mark and I haven't touched the hardware?

Yes, if the Giteki mark is legible, matches the device's actual model and hardware revision, and nothing about the certified radio configuration has changed since original sale, the existing certification continues to cover the device. The risk is in verifying that match at intake, not in the resale transaction itself. A quick model and mark check per batch is the practical safeguard.

Does replacing a cracked screen or swapping a battery during refurbishment break Giteki certification?

A screen replacement on its own does not affect Giteki coverage because it has no RF function. A battery swap is usually fine for Giteki as long as the replacement doesn't disturb or obscure the physical mark, but check separately whether the replacement battery still falls within the device's existing PSE (Electrical Appliance and Material Safety Act) certification, since that is a distinct regime from Giteki.

What do I do if I already imported a lot of used devices and found some with missing or damaged Giteki marks?

Separate those units from the rest of the lot immediately and treat them as needing a fresh compliance determination before listing them for sale, the same position as an uncertified import. Japan's baseline Giteki certification requirement covers what counts as evidence of compliance if you need to establish the starting point for that review. A radio law compliance screening on the affected units is the usual first step to determine whether the original certification can be reconstructed from records or whether new type certification is required.

Is there a different rule for IoT devices and routers compared to phones?

No, the underlying rule is the same across smartphones, routers, and other IoT devices: Giteki certification attaches to the certified hardware configuration and its physical marking, regardless of device category. What differs in practice is how marking survives refurbishment, since a router's label is often on an external housing panel that is more exposed to wear and swap-out than a phone's internal or on-screen marking.


This article is informational only and does not constitute legal, tax, or regulatory advice. Consult a qualified advisor before acting on the content. Last updated: November 2026.