On this page
- Which toys count as infant toys under the Child PSC rules?
- What must an importer do before selling an infant toy in Japan?
- Does an infant toy need third-party testing in Japan?
- Can a foreign toy brand file without a Japan company?
- What happens to toys made or imported before 25 December 2025?
- Does an electric baby toy need PSE as well as the Child PSC Mark?
- Frequently Asked Questions
Yes, if the toy is designed mainly for home play by children under 36 months. Since 25 December 2025, Japan's Consumer Product Safety Act (消費生活用製品安全法) treats these toys as Specified Children's Products (子供用特定製品). Before a unit is sold, the importer files with the Ministry of Economy, Trade and Industry (経済産業省, METI), confirms the toy meets the technical standard, sets an age grade, prints Japanese warnings and applies the Child PSC Mark.
Which toys count as infant toys under the Child PSC rules?#
A toy is in scope when it was designed primarily for play at home by a child under 36 months from birth. That is the wording of item 13 of Appended Table 1 to the Consumer Product Safety Act Enforcement Order (消費生活用製品安全法施行令), which lists infant toys (乳幼児用玩具) as a specified product. Article 3 of the same Order puts them on the children's list alongside infant beds, infant bed guards and strollers.
Design purpose decides scope, so the age printed on the box cannot move a toy out on its own. The technical standards ordinance sets four rules for the stated age. It needs a reasonable basis. It cannot contradict the age the advertising implies. Its lower limit cannot sit above the lower limit used for similar products, or above the age a consumer would reasonably infer from the toy's function and size. A soft rattle labelled "3+" fails all four.
Toys for older children still need a look. Magnetic play sets (磁石製娯楽用品) and water-absorbing resin toys (吸水性合成樹脂製玩具), the expanding "water beads," are separate specified products on the same table. They are caught whatever the target age once their magnets or beads fall at or below sizes METI sets by ordinance, and they carry the standard PSC mark.
What must an importer do before selling an infant toy in Japan?#
There are five steps, and the mark comes last. Only a business that has filed with METI, a notifying business (届出事業者), may apply it, and applying it certifies that the earlier steps were done.
(a) File the manufacturing or import business notification (製造又は輸入事業届出) with METI. The filing declares the model types (型式の区分) the toys fall into. The ordinance divides infant toys into 48 types, by what the toy is mainly for (to be touched, to support the body, or other) and by whether it has moving or projectile parts, magnets, a sound-making structure or a heat source. The filer must also hold product liability insurance covering at least JPY 10 million per victim and JPY 30 million a year.
(b) Confirm conformity with the technical standard in the ordinance. It covers mechanical strength and stability, edges, points and cords, moving parts, neck compression, suffocation from covering the mouth and nose, choking on small parts, packaging that could suffocate, and escape from any toy a child can climb inside. The importer keeps an inspection record (検査記録).
(c) Set the age grade under the four rules above.
(d) Print the Japanese warnings. Every infant toy states its suitable age and that a parent or guardian should supervise. Some designs carry more: water toys must say they are for water shallow enough for the child to stand in, balloons carry three handling warnings, and a toy for children of 18 months and over with a long cord must warn that the cord can compress the neck and that the toy is not for use under 18 months. The ordinance sets those cord triggers at 220 mm and 300 mm, depending on whether the cord can entangle.
(e) Apply the Child PSC Mark (子供PSCマーク) indelibly on a visible surface of the toy. The packaging may carry it instead, and the instruction manual only where neither the toy nor its packaging can.
Does an infant toy need third-party testing in Japan?#
No registered inspection body is involved. The Act reserves third-party conformity inspection for Special Specified Products (特別特定製品), and the Enforcement Order limits that list to infant beds, portable laser pointers, bath water circulators and lighters. Infant toys are not on it, so the importer confirms conformity itself and keeps the record.
That confirmation usually rests on a test report the brand already holds. According to the Japan Toy Association (日本玩具協会)'s summary of METI's interpretive notice, the notice lists ISO 8124-1:2022 with ISO 8124-2:2023, EN 71-1:2014+A1:2018 with EN 71-2:2020, and ASTM F963-23 (specified clauses only) as standards that meet the technical standard. METI has also confirmed, through its no-action letter procedure, that the association's ST2025 standard conforms. The notice names editions, so check a report against the edition on the list before relying on it.
Those listed standards are the mechanical, physical and flammability parts of each family. Chemical safety for toys sits under the Food Sanitation Act (食品衛生法), which covers toys that children under six may put in their mouths and has its own import notification and testing. Our guide to the Food Sanitation Act rules for toys covers that track.
Can a foreign toy brand file without a Japan company?#
Yes. Since 25 December 2025, Article 6, item 2 of the Act has recognized the specified importer (特定輸入事業者): a business located outside Japan that is itself the importer of a specified product. It files in its own name, on condition that it appoints a Japan-resident Domestic Administrator (国内管理人) to handle METI contact, recall support and inspection cooperation. The route was built for brands that ship marketplace stock into Japan under their own name.
Customs runs on a separate track. A non-resident importer clears goods through an Attorney for Customs Procedures (税関事務管理人) under Article 95 of the Customs Act (関税法), and that appointment gives no standing under the Consumer Product Safety Act. Our post on the Domestic Administrator requirement explains why the two appointments never substitute for each other, and our ACP service page covers how the customs side is set up.
What happens to toys made or imported before 25 December 2025?#
They can still be sold without the mark. The supplementary provisions of the Cabinet Order that brought in the rule state that the sale restriction in Article 4(2) of the Act does not apply to infant toys manufactured or imported before the effective date, and they set no end date. A toy imported on or after 25 December 2025 has to complete every step before sale.
The provision reads "manufactured or imported," and METI's FAQ addresses how that applies to goods made abroad and shipped later. A brand relying on a pre-December manufacture date for stock that crossed the border afterwards should read that answer first. Bed guards and strollers work differently: unmarked units may be sold until a fixed sale-date deadline whatever their import date, as set out in our bed guard guide.
Does an electric baby toy need PSE as well as the Child PSC Mark?#
It can, and the two marks then sit side by side. The Electrical Appliance and Material Safety Act (電気用品安全法) Enforcement Order lists electric heating toys (電熱式おもちゃ) and motor-driven toys and other motorized play equipment (電動式おもちゃ) as Specified Electrical Appliances (特定電気用品). That is the diamond PSE category, which requires conformity inspection by a registered body. Both entries are limited to products rated for 100 to 300 V AC mains use.
That limit keeps most baby toys away from PSE, because a toy that runs on its own dry cells is not used on an AC circuit. Three parts still deserve a check. An AC adapter in the box is a DC power supply (直流電源装置), itself a diamond PSE product. A lithium-ion battery is a listed round PSE product where a single cell's energy density is 400 Wh/L or more, so a spare or replacement pack sold with the toy needs its own assessment. A toy with Bluetooth or Wi-Fi also needs technical conformity certification under the Radio Act (電波法).
The electrical side has its own non-resident route. The same 2025 amendment added a specified importer category with a Domestic Administrator to the Electrical Appliance and Material Safety Act, so a brand covered by both Acts files and names a Domestic Administrator under each. Our guide to PSE for foreign manufacturers covers the electrical filing.
Frequently Asked Questions#
Is the ST Mark enough to sell an infant toy in Japan?
The ST Mark is the Japan Toy Association's voluntary mark, given to toys a third-party lab has found to meet the ST standard. METI has confirmed that ST2025 meets the Child PSC technical standard, so an ST2025 test report can support the conformity step. The METI filing, the Japanese warnings and the Child PSC Mark are still required on top of it.
Does a toy for children aged three and over need the Child PSC Mark?
No, provided the age on it is genuine. A toy designed for children of 36 months and over is outside the infant toy category, and the age-grading rules stop a seller from setting an age higher than the toy's design, size and advertising support. Magnetic play sets and water-absorbing resin toys fall under the general PSC regime whatever their target age.
Does one filing cover every SKU?
The filing is made per product category and declares the model types the range falls into, so a line of infant toys does not need a separate filing for each SKU. Each model still needs its conformity check and inspection record before it is sold.
Can I keep selling infant toys imported before December 2025 without the mark?
Yes, and that exemption has no end date. The Cabinet Order's transitional provision exempts infant toys manufactured or imported before 25 December 2025 from the sale restriction. Toys imported from that date on need the full process before sale.
This article is informational only and does not constitute legal, tax, or regulatory advice. Consult a qualified advisor before acting on the content. Last updated: November 2026.
